|
|
Prolon support makes it possible to download the latest software
versions for our products,
as well as files needed for various LonWorks installation tools.
|
|
|
Lonbox® Series Comfort and Light
Controller |
|
|
|
Documents I&O
Mapping for LonMaker Software for hardware revision B (serial 0721-XXX and higher) Version 16.00 PZM4148 software and XIF Version 16.00 In version 16 a new temperature sensor type have been added. Note this requires Lonbox Resource Files version 1.33. Version 15.01 PZM4148 software and XIF Version 15.01 In version 15 some new configuration options for limiting setpoint offset in space comfort controller has been added. Version 14.03 PZM4148 software and XIF Version 14.03 In version 14 the indoor air quality functions have been integrated into the space comfort controller instead of being separate functional blocks. Version 7.02 PZM4148 software and XIF Version 7.02 Software for hardware revision A Version 8.00 PZM4148 software and XIF Version 8.00 Version 6.08 PZM4148 software and XIF Version 6.08 Version 5.03
PZM4148
software and XIF Version 5.03 In software version 5, the lamp actuator objects have been added for the sunblind output making it possible to use these as normally closed lamp outputs. The number of both analog and digital function blocks have been increased. Scene panel has been added for for resistor based pushbuttons. Sunblind controllers has been added. Version 3.02 PZM4148 software Version 3.02 New function implemented for Multi Function push buttons, based on resistor networks in the push button. Version 2.02 PZM4148 software Version 2.02
Added switch object, the switch has limited functionality
(toggle). Version 1.01 PZM4148 software Version 1.01 Hardware Information Hardware changes due to RoHS Because of the RoHS directive some hardware components have been changed on the product. One component, the Smart Transceiver, affect the network interface (XIF) of the PZM4148 because of a firmware version change. Common network management tools cannot handle product with same application interface version but with changed firmware and for this reason it has been necessary to release a new PZM4148 application software version. All product with serial number 0721-XXXX or higher should use software version 7, 9 or higher. Hardware support for multi button resistor switches The support for multi function switch buttons based on resistor networks available in software version 3 and later requires revision M hardware. The PZM4148 is marked PZM4148-M on the type label. All other functionality in the new software versions are fully compatible with the older hardware revision and the software can be run on these, only the switch functions will not work. |
|
|
Documents
English
PZM4146 Software Users Guide ver. 1 Software
Version 4.00 PZM4146
software in ZIP Archive 4V00 |
|
|
PZM2114
APB and XIF in ZIP Archive 2V06 PZM2114 APB and XIF in ZIP Archive 3V00 English PZM2114 Software Users Guide ver. 2 and 3 |
|
|
Prolon Multi Load LM System PlugIn 2V00 |
|
Lonbox® Series Light Controller |
|
|
PLS4024 |
Two channel light module with 4 digital inputs for switch
or occupancy sensor and two low side FET switch outputs for driving external
12 or 24 V relays. Software for hardware revision B Version 3.00 PLS4024 APB and XIF in ZIP Archive 3V00 Software for hardware revision A Version 1.00 PLS4024 APB and XIF in ZIP Archive 1V00
|
|
PLS4044 |
Four channel light module with 4 digital inputs for switch
or occupancy sensor and four NO relay outputs in two groups with build in RC
protection of the relays. Version 4.00 PLS4044 APB and XIF in ZIP Archive 4V00
|
|
PLS4088 |
Eight channel light module with 8 dimmable outputs and
inputs for occupancy and light sensors. Constant light controller. Version 6.00 PLS4088 software and XIF in ZIP Archive 6V00 Version 5.00 PLS4088 software and XIF in ZIP Archive 5V00 PLS4088 PCB Layout PLS4088 Kasse indlæg
|
|
|
Two channel light module with 4 digital inputs for switch or
occupancy sensor and two relay outputs. Version 3.01 PLS2024 APB and XIF in ZIP Archive 3V01 Added functionallity
for setting commands to occupancy controllers. Version 2.02
PLS2024
APB and XIF in ZIP Archive 2V02 |
|
|
Version 4.00 PLS2024 APB and XIF in ZIP Archive 4V00 (scene panel) |
|
Lonbox® Series sunblind motor drivers |
|
|
PSD4044 |
Version 7.00 PSD4044 APB and XIF in XIP Archive 7V00 |
|
PSD2060 |
Version 3.01 PSD2060 APB and XIF in ZIP Archive 3V01 |
|
PSD2013 |
Version 7.02
PSD2013
APB and XIF in ZIP Archive 7V02 |
| PSD2013 Connection Diagram | |
|
Lonbox® Series switches and displays |
|
|
PSW40XX |
Documents PSW4033/22/11 Software Users Guide Version 2PSW4033/22/11 Initial Box Documentation |
|
Software for hardware revision B Version 3.00 PSW4022 APB and XIF Version 3.01 Software for hardware revision A Version 2.01 PSW4022 APB and XIF Version 2.01Version 1.01 PSW4022 APB and XIF Version 1.01 |
|
|
Software for hardware revision B Version 3.00 PSW4022 APB and XIF Version 3.01 Software for hardware revision A Version 2.01 PSW4033 APB and XIF Version 2.01Version 1.01 PSW4033 APB and XIF Version 1.01 |
|
Version 3.00 PSW2042 APB and XIF Version 3V00 |
|
Version 1.01 PCM4001 APB and XIF in ZIP Archive 1V02 |
|
Version 3.01 PCM2001 APB and XIF in ZIP Archive 3V01 |
|
|
Version 1.00 PCM2001N
APB and XIF in ZIP Archive 1V00 PCM2001N Software User Guide 1V00 |
|
PIO2004/PSM2004 |
PIO2004 with Version 1.00 PSM2004 software This software is made as a Switch Module interface for potential switches in the PIO2004 hardware platform. Interfacing 4 digital input to the following LonMark objects: 4 Switch, 1 Scene Panel and 2 Scene Controller. PSM2004 APB and XIF in ZIP Archive 1V00 Scene and Switch interface |
|
Lonbox® Series analog input module |
|
|
PAI4024 |
Documents Software for hardware revision B Version 3.00 PAI4024 APB and XIF in ZIP Archive 3V0 Software for hardware revision A Version 2.00 PAI4024 APB and XIF in ZIP Archive 2V0 |
|
PTC4024 |
Documents Software for PT1000 sensor Version 1.02 PTC4024 APB and XIF in ZIP Archive 1V02Software for NTC20K sensor Version 2.00 PTC4024 APB and XIF in ZIP Archive 2V00 |
|
PIO2024
Applikation's Principper Version 4.00 PIO2024 APB and XIF in ZIP Archive 4V0 ADC and DAC function block from v2 & v3 merge into one application. In addition to the physical sensor and actuator objects the application now contains 3 analog function, 3 digital to analog converters and 2 analog to digital converters. Note that due to code space requirements, some functions like programmable nv types have limited functionality. Version 3.00 PIO2024 APB and XIF in ZIP Archive 3V0 The two digital to analog converter function block has been replaced by two analog to digital function blocks. (They can be used for controlling a lamp by a 0..10 V signal). Version 2.00 PIO2024
APB and XIF in ZIP Archive 2V0 |
|
Lonbox® Series digital input module |
|
|
PDI4024 |
Version 3.00 PDI4024 APB and XIF in ZIP Archive 3V0 |
|
Lonbox® Series energy counter module |
|
|
|
This module has 3-digigal impulse counter inputs and one
serial input for serial meter interface to IEC1107 based beters Version 2.00 PIO4014 APB and XIF in ZIP Archive 2V0 |
|
Lonbox® Series pulse counter and
digital input module |
|
|
PPC4024 |
The module
has 4-digital impulse counter input and two digital outputs. The impulse
counter functions are compliant to LonMark functional profile 22.01 Utility
Meter. Each input can be separately configured with pulse value, preset,
unit. Documents Software for hardware revision B Version 7.01 PPC4024 APB and XIF in ZIP Archive 7V01 Software for hardware revision A Version 2.00 PPC4024 APB and XIF in ZIP Archive 2V00 In the version 5 interface the start value and pulse factor configuration is implemented as a network variable, this allows access from tools not supporting configuration files.Version 5.00 PPC4024 APB and XIF in ZIP Archive 5V00
|
|
The module has 4-digital impulse counter inputs where each input can separately be converted to a value presented on the control network. Version 3.00 PIO2004
APB and XIF in ZIP Archive 3V00 Version 2.00 PIO2004 APB and XIF in ZIP Archive 2V00 This software version is for accumulated consumption. This software includes a math module. |
|
Lonbox® Series HVAC unit |
|
|
Version 2.02 PCC2053 APB and XIF in ZIP Archive 2V02 |
|
Lonbox® Series WEB Server and data logger |
|
|
Version 0.29
PID2000
Software in ZIP Archive 1V29 Version 1.2X PID2000 XIF file in ZIP Archive from 1V23 and up |
|
PID4000 |
Version 0.39 PID4000 Software in ZIP Archive 0V39 |
|
|
Version 2.04 Archive Service in ZIP Archive 2V04.010 |
|
Lonbox® Fidelio gateway |
|
|
|
Version 1.05
PFG4000-100
XIF file in ZIP Archive 1V05 |
|
Lonbox® Series |
|
|
NOTE: It is important that the resource files are registered before the device templates, that uses the resources, are installed in the LNS system. Also stop any LNS based systems before registering the files. When replacing old Lonbox resource files with new resource files then, just copy the new files into the same directory. No registration is then needed. |
|
The software is packed in ZIP files. Please use an UNZIP program to unpack the software archives. This program could be WINZIP, from WinZip Computing, Inc. For more information about these Prolon products please contact Prolon Control Systems directly or your nearest national distributor. |
|
Last modified: december 09, 2009 |
|